Eduroam is a wifi network commonly used on univeristy campuses. Connecting to eduroam is slightly more complicated than connecting to a standard wifi network.
Inside the terminal on the Raspberry Pi, first disable the
wpa_supplicant processes with these two commands:
sudo killall wpa_supplicant
Next, edit the network configuration file located at
/etc/wpa_supplicant/wpa_supplicant.conf and insert the following network configuration - make sure to pay attention to spacing and indentation. Put your university email and password in the file:
sudo nano /etc/wpa_supplicant/wpa_supplicant.conf
Test the WPA supplicant:
sudo wpa_supplicant -i wlan0 -c /etc/wpa_supplicant/wpa_supplicant.conf
If your configuration file has syntax errors or if you have an incorrect username/password, the debug menu here should give you more information.
Otherwise, it will say that you successfully authenticated with the network. Hit ctrl+c to exit the tester.
Finally, restart the computer and upon boot, you should have internet access:
sudo reboot now
Test your internet with the following command - you should see responses from Google's server if you have internet access: